http://www.vintagetractorengineer.com/blog Wed, 03 Sep 2008 03:34:52 +0000 http://backend.userland.com/rss092 en The steering wheel is held in place on the Massey Ferguson 35, Ferguson FE35 and Ferguson TO35 with a single nut and washer.  However, after removing the nut and washer is is often hard to loosen the wheel. The shaft that the steering wheel fastens to is tapered, so it is ... http://www.vintagetractorengineer.com/blog/2008/08/19/how-to-remove-steering-wheel-mf-35/ Hi, I've got a MF35X which I have been using to "top" the reeds with a small topper. Unfortunately, the PTO has been slowing and even coming to a stop when under load, and the lifting hydraulics have failed several times when trying to lift the topper. Both functions appear ... http://www.vintagetractorengineer.com/blog/2008/07/20/slow-pto-massey-ferguson-35x/ Hi was wondering if anybody could help me with a problem with a 23c Massey 35 I bought a few weeks ago. When i bought it i was told it had a full engine rebuild but was still very Smokey. Was told it would be the injectors so had them ... http://www.vintagetractorengineer.com/blog/2008/05/27/smoking-engine-massey-ferguson-35/ I have a 23c and need to know how to wire the glow plugs and how long to heat them as i just got my 2nd set of them and dont want to buy any more? I got the tractor in a basket and my book did not cover wiring.Thanks, J & ... http://www.vintagetractorengineer.com/blog/2008/05/27/ferguson-fe35-heater-plug-wiring-diagram/ White 2-45 Field Boss tractor, PTO drive slipping problem.I have a White 2-45 Field Boss tractor that is 1980's era. The main drive clutch and the PTO clutch were replaced last year however the PTO still dosen't work properly. It seems like the PTO hydraulic clutch pack is not engaging ... http://www.vintagetractorengineer.com/blog/2008/05/27/white-field-boss-2-45-pto-problem/